User's Manual Part 2

OMNI 3600 TERMINAL AND OMNI 3600 BASE INSTALLATION
Omni 3600 Terminal
18 OMNI 3600 REFERENCE MANUAL
b Open the cardholder by pivoting the cover on its hinge away from the
connector base (Figure 12).
Figure 12 Insert MSAM Card into Cardholder
4 Remove any previously installed MSAM card by sliding the card from the
cover.
5 Install an MSAM card by aligning the card and carefully sliding it within the
guides on the cover until fully inserted.
6 Close the cover (Figure 12).
7 Lock each MSAM cardholder by sliding its locking plate towards the LOCK
arrow until the plate stops (Figure 11).
8 Close the MSAM door.
9 Replace the smart battery.
Install/Replace
SIM Card (GSM
models)
The SIM (Subscriber Identity Module) card is a smart card inserted in the
Omni 3600 GSM terminal that contains your GSM radio account information. Use
the following procedure to replace or install a SIM card.
NOTE
The cardholder has a set of contacts and a notch on one corner to ensure the
MSAM card is positioned correctly when the cover is closed. The MSAM card has
a notch on one corner to ensure it is correctly positioned in the cardholder. Before
inserting the MSAM card, position it as shown in Figure 12.
CAUTION
To avoid damage to the MSAM cardholders, ensure each cardholder is locked
before closing the MSAM door.