User's Manual Part 3

SYSTEM MODE

System Mode Menus

42 OMNI 3600 REFERENCE MANUAL

Enter and Exit

System Mode

To enter system mode after you have turned on the Omni 3600 terminal, follow

the procedure described in Table 5.

NOTE

On successful completion, some operations automatically exit system mode and

restart the terminal. Other operations require that you exit system mode and

restart the terminal. To manually exit system mode, select

RESTART F4 in SYS MODE

MENU 1

Table 5 Enter System Mode

Display Action

VERIFONE OMNI 3600

Q80000XX

4/10/01 VERIX

VERIFONE, INC.

Battery 95%

At startup, the terminal displays a copyright notice

screen that shows the terminal model number, the

version of the Omni 3600 system firmware stored in the

terminal’s flash memory, the date the firmware was

loaded into the terminal, the copyright notice, and

battery charge remaining.

This screen appears for three seconds, during which

time you can enter system mode by simultaneously

pressing F2 and F4.

You can extend the display period of this screen by

pressing any key during the initial three seconds. Each

key press extends the display period an additional

three seconds.

(Application Prompt)

DOWNLOAD NEEDED

If an application already resides on the terminal, an

application-specific prompt displays. If no application

resides on the terminal, the following message

displays:

DOWNLOAD NEEDED

To enter system mode from this screen, simultaneously

press F2 and F4.