User's Manual Part 3

SYSTEM MODE
System Mode Menus
O
MNI 3600 REFERENCE MANUAL 43
System Mode
Menu 1
In this menu you can adjust the display contrast, set the terminal clock, and exit
system mode.
SYSTEM MODE ENTRY
PASSWORD
-------------------
If an application prompt appeared in Step 2 and you
chose to enter system mode you are prompted to type
the system password.
If
DOWNLOAD NEEDED appeared in Step 2, use the
default password “Z66831.” This password is entered
as:
1 ALPHA ALPHA 6 6 8 3 1, and press [
↵]
Use the backspace [
←] key to delete the entry and
correct any mistakes. If you enter an incorrect
password, the terminal exits the
SYSTEM MODE ENTRY
screen. Verify your password and re-enter it.
To quit this operation and return to the application
prompt or
DOWNLOAD NEEDED screen, press the
cancel key.
SYS MODE MENU 1
CONTRAST F2
CLOCK F3
RESTART F4
↓
SYS MODE MENU 1 is the first menu to display. To
toggle through to the other six menus, press the PF2
key or [
↵] until you reach the desired menu.
a. May have the letter G for GSM radio, P for GPRS radio, or C for CDMA radio.
Table 5 Enter System Mode (continued)
Display Action
Table 6 System Mode Menu 1
Display Action
SYS MODE MENU 1
CONTRAST F2
CLOCK F3
RESTART F4
↓
To adjust the display contrast, select CONTRAST F2. To
set the date and time, select
CLOCK F3.
To restart the terminal, select
RESTART F4.
To toggle to system mode menu 2, press PF2 or [
↵].
CONTRAST F2
SYS MODE CONTRAST
CONTRAST UP F2
CONTRAST DOWN F3
↑
Select CONTRAST UP F2 to increase display contrast
or
CONTRAST DOWN F3 to decrease display contrast.
To return to the main menu and save your changes,
press [
↵].