User's Manual Part 3

SYSTEM MODE
System Mode Menus
46 OMNI 3600 REFERENCE MANUAL
RAM FILES F3
SYS MODE RAM
CLEAR GROUP _1 F2
CLEAR ALL FILES F3
To clear a file group’s RAM files, type the file group
number (1–15) and press F2. To correct a mistake,
press [
←] to delete the number, and type a new entry.
CONFIG.SYS protected records that begin with * or #
are retained when you clear a RAM file group.
To clear the RAM of all file groups, select
CLEAR ALL
FILES F3
. This operation also clears the CONFIG.SYS
files from all groups except Group 1. Records that
begin with * or # in Group 1 are retained.
Note: If you have not previously entered a group’s
password in this session, the terminal
prompts for the group’s password prior to
clearing that group’s RAM files.
SYSTEM MODE FILE
GROUP
NN PASSWORD
-----------------
To continue, enter the required password. If you enter
an incorrect password, the following message
appears:
SYS MODE PASSWORD
PLEASE TRY AGAIN
Press [↵]. Verify your password and re-enter it.
SYS MODE CONFIRM
CANCEL F3
CONFIRM F4
To cancel the operation, select CANCEL F3.
To continue the operation, select
CONFIRM F4. After
the operation is complete, you return to the main
menu.
FLASH FILES F4
SYS MODE FLASH
CLEAR GROUP _1
F2
CLEAR ALL FILES
F3
DEFRAG 0 F4
To clear a file group’s flash files, type the file group
number (1–15) and press F2. To correct a mistake,
press [
←] to delete the number, and type a new entry.
To clear the flash files of all file groups, press F3. If you
have not previously entered a group’s password in this
session, the terminal prompts you for the group’s
password prior to clearing that group’s flash files.
CAUTION! Clearing all flash files erases the
application program from your terminal. A new
application download is then required.
To defragment flash files, press F4, then skip to
SYS MODE CONFIRM of this procedure.
The number displayed beside
DEFRAG is the total
amount of space, in bytes, to reclaim in the defrag
operation.
Table 7 System Mode Menu 2 (continued)
Display Action