User's Manual Part 3

SYSTEM MODE
System Mode Menus
O
MNI 3600 REFERENCE MANUAL 47
System Mode
Menu 3
In this menu, you can view terminal configuration information, edit the
CONFIG.SYS or another keyed file, and change system mode and file group
passwords.
SYSTEM MODE FILE
GROUP
NN PASSWORD
-----------------
To continue, enter the required password. If you enter
an incorrect password, the following message
appears:
SYS MODE PASSWORD
PLEASE TRY AGAIN
Press [↵]. Verify your password and re-enter it.
SYS MODE CONFIRM
CANCEL F3
CONFIRM F4
To cancel the operation, select CANCEL F3. To
continue the operation, select
CONFIRM F4. After the
operation is completed, you are returned to the main
SYS MODE MENU 2 screen.
If you selected
DEFRAG in SYS MODE FLASH and
select
CONFIRM F4 here, you are taken to SYS MODE
DEFRAG.
SYS MODE CLEAR
CLEARING FLASH
PLEASE WAIT
This operation may take a few seconds. If you have
cleared all flash files, the terminal displays
DOWNLOAD
NEEDED on restart.
If after clearing selected flash files you experience
difficulties with your application, you may have
accidentally deleted a flash file that the CONFIG.SYS
file in File Group 1 uses. This type of error usually
generates the error message
RUN FAILED when trying
to execute the application; you must restore the
required File Group 1 flash file.
SYS MODE DEFRAG
RECLAIMING FLASH
PLEASE WAIT
This message indicates the flash files are being
defragmented; this operation may take a few seconds.
On successful completion, the terminal automatically
restarts.
Table 7 System Mode Menu 2 (continued)
Display Action
NOTE
Some application program downloads automatically reset the system
password.