User's Manual Part 3

SYSTEM MODE
System Mode Menus
O
MNI 3600 REFERENCE MANUAL 49
SYS MODE CONF
MODL OMNI3600
CTRY US
KEYPAD 0
DISPLAY 128064
MAG RDR 0
PRINTER 1
↑
This screen shows additional configuration information
specific to your terminal:
• Model number
• Country of manufacture
• Keypad type (0 = Telco, 1 = calculator,
2 = Singapore)
• Display unit type
• Magnetic stripe card reader type
• Whether or not a thermal printer is integrated into
the terminal (where 0 = No, 1 = Yes)
To return to the previous menu, select the PF1 key; to
continue, select the PF2 key.
To return to the main menu, press the cancel key.
SYS MODE CONF
PINPAD 0
LIFE 73525
RSET
971117023334
RCNT 29
MODEM CTRY?
↑
This screen shows additional configuration information
specific to your terminal:
• Whether or not a PIN pad device is integrated into
the terminal (where 0 = No, 1 = Yes)
• Number of seconds the terminal has run (LIFE)
• Last reset date and time, in YYMMDDHHMMSS
format (where YY = year, MM = month, DD = day,
HH = hour, MM = minute, and SS = second)
• Number of times the terminal has been reset (RCNT)
• Modem country code (not applicable on this model)
To return to the previous menu, select the PF1 key; to
return to the main menu, press the cancel key.
EDIT F3
SYS MODE FILE
FILE GROUP _1
To search for keyed records in a particular file group,
type the appropriate group number and press [
↵].
If you cannot locate a particular keyed record, it may
be stored in another file group. To search for keyed
records in another file group, return to the main menu
by pressing the cancel key, then type the appropriate
group number and press [
↵].
To correct a mistake, press [
←] to delete the number,
and type the new entry.
SYSTEM MODE FILE
GROUP
NN PASSWORD
-----------------
To continue, enter the required password. If you enter
an incorrect password, the following message
appears:
SYS MODE PASSWORD
PLEASE TRY AGAIN
Press [↵]. Verify your password and re-enter it.
Table 8 System Mode Menu 3 (continued)
Display Action