User's Manual Part 3

SYSTEM MODE
System Mode Menus
50 OMNI 3600 REFERENCE MANUAL
SYS MODE EDIT
FILE CONFIG.SYS_
To edit the CONFIG.SYS file, press [↵].
Note: In this menu, you can create a new keyed file
or edit an existing one. First, use [
←] to clear
any previous key name from the display.
Then, type the key name, press [
↵], and skip
to the
SYS MODE EDIT VALUE screen below.
SYS MODE EDIT
KEY
(K
EY NAME)
--------
-------------------------
To create or search for a keyed record, use [←] to
clear any previous key name from the display. Then,
type the key name, press [
↵], and skip to Step 5b of
this procedure.
To scroll through the search keys, press [
↵], or use the
PF1 or PF2 keys to scroll the up and down
respectively, as needed.
To scroll through keyed records, press either the PF3
or the PF4 key, below the Left and Right arrows
respectively, as needed.
SYS MODE EDIT
(K
EY NAME) KEY
F2
(K
EY VALUE)
VALUE F3
↑↓ ←→
To scroll through the search keys, press [↵]. Or use
the PF1 or PF2 keys to scroll the up and down
respectively, as needed.
To manually enter another key name, select
KEY F2
and use [←] to clear the previous key name from the
display. Then, type the appropriate key name and
press [
↵].
To scroll through the displayed key value, press either
the PF3 or the PF4 key, below the Left and Right
arrows respectively, as needed.
To edit a key value, select
VALUE F3 and proceed to
the next step.
SYS MODE EDIT
VALUE
(Value)----------------
-------------------------
To create or edit a key value, use [←] to clear any
previous key value from the display. Then, type the
new key value and press [
↵].
SYS MODE EDIT
(Key name) KEY F2
(Key value)VALUE F3
↑↓ ←→
To exit SYS MODE EDIT after completing your edit
operations, press the cancel key twice.
Table 8 System Mode Menu 3 (continued)
Display Action