User's Manual Part 3

SYSTEM MODE
System Mode Menus
O
MNI 3600 REFERENCE MANUAL 53
Table 9 System Mode Menu 4
Display Action
SYS MODE MENU 4
REMOTE DIAGS F2
ERROR LOG F3
DEBUGGER F4
↑↓
REMOTE DIAGS: This function is reserved for future
use with TMM.
To return to the previous system mode menu, press
the PF1 key; to return immediately to
SYS MODE MENU
1
, or to quit any operation within this menu, press the
cancel key; to move to the next system mode menu,
press the PF2 key or [
↵].
ERROR LOG F3
SYS MODE ERR LOG
TYPE 0000
FRAME 00800698
008002BA
F1000002
00A00000
↑↓
The error log screens display internal diagnostic
information about the most recent unrecoverable
software error. If you report a terminal problem, you
may be asked to provide this information.
This first screen displays the following:
TYPE (Error Type)
FRAME (Stack Frame)
After making any notations, press the PF2 key to view
additional error log information.
SYS MODE ERR LOG
USP 2491ED57
TCB 00000000
TIME 010329053144
↑
This screen displays the following:
USP (User Stack Pointer)
TCB (Task Control Block)
TIME (binary-coded, decimal system, clock time of the
error in the format yymmddhhmmss, where yy = year,
mm = month, dd = day, hh = hour, mm = minute, and
ss = second)
After taking desired notes, press the PF1 key to view
the previous screen or press the cancel key to return
to the main menu.
DEBUGGER F4
DEBUGGER F4: This selection starts the application
program’s debug monitor, if installed, on the selected
file group.
The Verix Operating System Programmer’s Manual
fully documents debug operations. For more
information on debugging your terminal, contact your
terminal supplier.