User's Manual Part 3

PERFORMING DOWNLOADS
Set Up the Download Environment
78 OMNI 3600 REFERENCE MANUAL
• Direct serial cable connection for back-to-back application downloads. The
link is between the RS-232 port of the base stations between the docked
sending and docked receiving Omni 3600 terminals, or between two
Omni 3600 terminals directly connected by cable through two MOD10
adapters.
A special cable is required for back-to-back downloads (PN 056051-00). This
cable has two 10-pin RJ45 modular plugs on each end to establish the base
station-to-base station connection.
Cable Connection
for Direct
Downloads
There are two cables and one adapter for direct downloads:
• DB25 serial connector (PN 26263-02)
• DB9 connector (PN 26264-01)
• MOD10 adapter (PN 22536-01)
The following steps describe how to establish the cable link between the sending
host computer and the receiving Omni 3600 terminal (see Figure 32):
1 Connect the DIN-type connector on one end of the cable to the COM1 (or
COM2) serial I/O port on the download computer.
2 Connect the RJ45 connector on the other end of the download cable to the
RS-232 port on the back panel of the base station of the docked Omni 3600
terminal, or to the MOD10 adapter installed in an undocked Omni 3600
terminal (see Figure 33).