User's Manual Part 3

PERFORMING DOWNLOADS

Back-to-Back Application Downloads

MNI 3600 REFERENCE MANUAL 93

4 Initiate the file transfer on the PC.

5 From SYS MODE MENU 2 on the Gold terminal, select either a full or a partial

download.

The PC transfers files to the Gold terminal.

Download Application Files to Target Terminal

1 Configure a Gold terminal for an application download operation to a

deployment terminal:

• If the *FA variable (if present in the application) is set to 1, you can reset it

to 0. For more information on the *FA variable, refer to the Verix

Programmer’s Manual (PN 19733).

• Ensure the download is exactly what you want your Target terminals to

receive.

• Ensure that previously authenticated files are not changed prior to the file

transfer operation.

2 Configure the docked Target terminal to receive an application download from

the Gold terminal:

• From SYS MODE MENU 2, set Group 1 and the COM1 port to receive the file

transfer.

3 Connect a cable between the RS-232 serial ports of the base stations of the

docked Gold and Target terminals, or between the MOD10-equipped Gold

and Target terminals.

4 From any system mode menu on the Gold terminal, press [*] and enter the

GID1 password to initiate the file transfer.

5 From SYS MODE MENU 2 on the deployment terminal, select either a full or a

partial download. The Gold terminal begins to transfer files to the Target

terminal.

Figure 34 illustrates these two phases and how they relate to each other.