User's Manual Part 4

SYSTEM MESSAGES
132 OMNI 3600 REFERENCE MANUAL
This message displays when you select CONFIG INFO F2 in SYS MODE MENU 3 and press
the PF2 key (below the down arrow) to display the next screen. This second
display, in a series of four, provides the following information about the current
terminal configuration:
• RAM: The RAM (SRAM) size in kilobytes (KB).
• FLASH: The flash memory size in KB.
• SERNO: The serial number assigned to the terminal on manufacture.
• PTID: The permanent terminal ID assigned to the terminal on manufacture. If no
PTID is assigned, the default value is “12000000.”
• PART: The part number assigned to the terminal on manufacture.
• VERS: The hardware version number assigned to the terminal on manufacture.
A corrupt file is detected in the RAM file system at terminal start up, after power-
on, or during restart. This message may indicate a hardware problem or the error
condition may be resolved through another download of the file.
This message displays when you select
CONFIG INFO F2 in SYS MODE MENU 3. This first
display, in a series of four, provides the following information about the current
terminal configuration:
• INUSE: The number of bytes of memory space currently being used in the RAM
file system (
RAM FILES) or the flash file system (FLASH FILES).
• AVAIL: The number of bytes of memory space currently available in the RAM file
system (
RAM FILES) or the flash file system (FLASH FILES).
RAM 1024
FLASH 2048
SERNO 024-546-755
PTID 12443328
PART P096-100-02
VERS 6
↑↓
RAM CHKSUM ERROR
RAM FILES 5
INUSE 31686
AVAIL 960630
FLASH FILES 1
INUSE 3232
AVAIL 1766232
↑↓
RECEIVING NOW