User's Manual Part 4

SYSTEM MESSAGES
OMNI 3600 REFERENCE MANUAL 135
This message displays when you initiate a local diagnostic test of the terminal
keyboard through
KEYBOARD DIAG F3 in SYS MODE MENU 5. When invoked, the decimal
ASCII keycode of each key you press (test) appears to the right of
KEYCODE. For
example, pressing the
1 key on the terminal keypad displays the corresponding
ASCII keycode, 31.
This message displays when you initiate the procedure for modifying existing
system mode passwords through
PASSWORDS F4 in SYS MODE MENU 3. Additional menu
options display to let you change the password of a file group (
F2) or the system
mode password (
F3).
This message displays when you select
PASSWORDS F4 in SYS MODE MENU 3 to modify
the existing system mode password.
• NEW: Make the appropriate menu selections to enter the new password.
• AGAIN: Repeat the entry to confirm the new password.
• PASSWORD CHANGED: Displays when the new password is accepted.
In a back-to-back download, the Gold (sending) terminal displays this message
when you initiate an upload from the receiving terminal. To stop the upload, press
the cancel key on either terminal.
When you invoke a local system mode diagnostic test of the magnetic stripe card
reader, status information appears for data track (TRK1, TRK2, and TRK3) on a
magnetic stripe card.
To perform this test, select
MAG CARD DIAG F4 in SYS MODE MENU 5 and swipe a magnetic
stripe card through the card reader:
• NO DATA or VALID DATA: A successful test of the magnetic-stripe card reader
displays for each track. Actual data stored on data tracks does not display.
• An error condition generates one of the following error messages for each
track with an error:
SYS MODE PASSWORD
FILE GROUP nn
GROUP nn PASSWORD
SYS MODE PASSWORD
NEW
AGAIN
PASSWORD CHANGED
SYS MODE UPLOAD
UPLOADING NOW
TRK1:
TRK2:
TRK3: