User's Manual Part 4

SYSTEM MESSAGES
136 OMNI 3600 REFERENCE MANUAL
• NO DATA
• NO START
• NO END
• LRC ERR
• PARITY ERR
• REVERSE END
Press the cancel key to end the local diagnostic test of the card reader.
If you are using the file compression module in DMM, information similar to what
is shown above appears when an error occurs during file extraction from a
downloaded ZIP archive. Note the error number and error codes (
xxxxx and yyyyy)
and try to download the archive again.
If you are using the file compression module in DMM, information similar to what
is shown above appears when a compressed file archive downloaded to the
terminal decompresses (unzipped), and the files extracted from the archive.
This message displays when the file authentication module detects a new digital
certificate, together with the filename of the certificate to authenticate, during a
download to the Omni 3600 terminal. If the authentication is successful,
Authentic
displays; otherwise,
Failed displays for five seconds and the terminal beeps three
times to draw attention to the filename of the certificate that could not be
authenticated.
This message remains on screen until all new certificates are checked, one by
one. In special cases where system certificates are being installed,
System Certificate
displays instead of
Check Certificate.
** UNZIP Error n
xxxxxx
yyyyyy
UNZIP stuff.zip
myprog.out
mydata.txt
6x8.fon
10x14.fon
...
** VERIFYING FILES **
Check Certificate
(or System Certificate)
filename.crt
** Authentic **
(or ---Failed---)