Installation Guide

OMNI 3600 BASE
Omni 3600 Base Features
24 OMNI 3600 INSTALLATION GUIDE
Omni 3600
Base Features
This section discusses the features of the Omni 3600 base.
Figure 21 Omni 3600 Base Features: Top
Figure 22 Omni 3600 Base Features: Back (Telco models)
The Omni 3600 base
• recharges the smart battery within a docked Omni 3600 terminal,
• charges a spare smart battery pack placed in the spare battery dock,
• establishes communications to a host through a 14.4 Kbps modem (Telco
port), and
• connects to optional peripherals through the serial (RS-232) port (see
Peripheral Devices).
The following are the physical features of the Omni 3600 base (Figure 21 and
Figure 22):
• Three status LEDs (light emitting diodes) viewed left-to-right
STATUS LEDS
SPARE BATTERY
DOCK
TERMINAL DOCKING
CONTACTS
TERMINAL DOCKING
CRADLE
CAUTION
Avoid touching the contacts in the raised area in the center of the Omni 3600
base. Finger oils tarnish contacts, causing bad connections. If the battery charge
state or terminal power LEDs do not light when the terminal is docked, or there is
a high occurrence of bad or incomplete data transfers, clean the contacts. See
Maintenance for more information.
POWER
PORT
RS-232
PORT
TELCO
PORT
TELSET
PORT
TERMINAL DOCKING
CRADLE