Installation Guide

OMNI 3600 BASE
Power Connection
26 OMNI 3600 INSTALLATION GUIDE
• Docking cradle: For Omni 3600 terminal (Figure 21) smart battery recharging
and data transfers.
• Spare battery docking station and optional spare battery: The recessed area
in the top-rear of the Omni 3600 base is the dock to charge and store a smart
battery. The spare battery LED does not light if no spare battery is present.
• Power port: The round port on back of Omni 3600 base (icon at left) connects
the Omni 3600 base to the power pack.
• Communications ports: The ports on the back of the Omni 3600 base allow
telephone or LAN line connectivity and peripheral device support.
Power
Connection
The Omni 3600 base unit must be plugged in to a power outlet to
• recharge a smart battery in a docked terminal,
• charge spare smart batteries,
• communicate with peripheral devices, and
• establish Telco host connections.
Figure 23 Power Pack Connection (Docked Terminal)
To connect the Omni 3600 base to power (Figure 23):
NOTE
The Omni 3600 terminal will not automatically turn off or sleep when docked; it
must be turned off manually (see Turn On/Off the Omni 3600 Terminal).
WARNING
Do not plug the power pack into an outdoor outlet.
NOTE
It is recommended that the power pack be plugged into a power surge protector to
protect against possible damage caused by lightning strikes and electrical surges.