Installation guide

28
Shell Aviation
3.3 Post Authorization Of A Transaction
IDLE PROMPT
Note: Post Authorization should ONLY be used when you call a card
center to obtain an Approval Code via voice authorization. If you
receive a Reference Number with a Pre Authorization, you MUST use
Sale.
1. To begin a Post Authorization, push [Post Auth].
If ‘Operator ID’ is ‘On’, the POS prompts for the Operator ID.
2. Enter the Operator Password, then push [Enter].
Enter Operator
Password F1
-> F2
F3
F4
3. Swipe the Card or enter the Card Number, then push [Enter].
Post Auth
F1
Swipe Card Or Enter
Card Number F2
-> F3
F4