User's Manual
Table Of Contents
- Omni 5xxx
- Contents
- Preface
- Terminal Overview
- Terminal Setup
- Select Terminal Location
- Unpack the Shipping Carton
- Examine Terminal Features
- Establish Telephone Line Connections
- Install Paper Roll
- Install/Replace MSAM Cards
- Connect Optional Device(s)
- Connect Terminal Power Pack
- Smart Battery
- Install/Replace SIM Card (GSM models)
- Wireless Transactions
- Smart Card Transaction
- Magnetic Card Reader Use
- Antenna (Some Wireless Models)
- Specifications
- Maintenance
- VeriFone Service and Support
- Troubleshooting Guidelines
TERMINAL SETUP
Connect Optional Device(s)
V
E
RI
F
O
NE
C
O
N
F
I
D
E
N
T
I
A
L
R
A
FT
OMNI 5XXX INSTALLATION GUIDE 21
Figure 12 provides an example of a smart card reader and PIN pad
connection to the PIN pad serial port.
Figure 12 Example PIN Pad Serial Port Connections
Connect Check
Reader
The Omni 5xxx terminal supports the CR 600 and CR 1000i check readers.
Contact your VeriFone representative or visit the online store at
www.store.verifone.com for information on these devices. Figure 13 provides
an example of a peripheral connection to the RS-232 port.
Figure 13 CR 600 Check Reader Connection
SMART CARD
READER CONNECTION
PIN PAD
CONNECTION
CAUTION
Check readers require a separate power source. Before connecting a check
reader or similar device, remove the power cord from the bottom of the terminal
and ensure that the green indicator LED is not lit.