User's Manual
Table Of Contents
- Omni 5xxx
- Contents
- Preface
- Terminal Overview
- Terminal Setup
- Select Terminal Location
- Unpack the Shipping Carton
- Examine Terminal Features
- Establish Telephone Line Connections
- Install Paper Roll
- Install/Replace MSAM Cards
- Connect Optional Device(s)
- Connect Terminal Power Pack
- Smart Battery
- Install/Replace SIM Card (GSM models)
- Wireless Transactions
- Smart Card Transaction
- Magnetic Card Reader Use
- Antenna (Some Wireless Models)
- Specifications
- Maintenance
- VeriFone Service and Support
- Troubleshooting Guidelines
TERMINAL SETUP
Wireless Transactions
26 OMNI 5XXX INSTALLATION GUIDE
V
E
RI
F
O
NE
C
O
NF
I
D
E
N
T
I
A
L
R
A
FT
2 Remove the SIM card access door (Figure 18):
Figure 18 Slide Off SIM Card Access Door
3 Open the SIM card holder and slide the SIM card supplied by your provider
into the cardholder (Figure 19).
Figure 19 Insert SIM Card into Cardholder
4 Replace the SIM card access door and screw.
Wireless
Transactions
To conduct a wireless transaction:
• Ensure the terminal is in an optimal position for transmitting.
• Follow the on-screen instructions provided with your application.
Smart Card
Transaction
The smart card transaction procedure may vary from one application to an
another. Verify the procedure with your application provider before you perform a
smart card transaction.
To Conduct a Smart
Card Transaction
1 Position a smart card with the contacts facing upward (see Figure 20).
2 Insert it into the smart card reader slot in a smooth, continuous motion until it
seats firmly.
NOTE
Do not lose the SIM card dust cover or retaining screw.
NOTE
The SIM cardholder has a notch on one corner to ensure the SIM card is
positioned correctly. The SIM card has a notch on one corner for easy orientation
in the cardholder. Before inserting the SIM card, position it as shown in Figure 19,
with the card’s gold contacts facing down.