User's Manual
Table Of Contents
- Omni 5xxx
- Contents
- Preface
- Terminal Overview
- Terminal Setup
- Select Terminal Location
- Unpack the Shipping Carton
- Examine Terminal Features
- Establish Telephone Line Connections
- Install Paper Roll
- Install/Replace MSAM Cards
- Connect Optional Device(s)
- Connect Terminal Power Pack
- Smart Battery
- Install/Replace SIM Card (GSM models)
- Wireless Transactions
- Smart Card Transaction
- Magnetic Card Reader Use
- Antenna (Some Wireless Models)
- Specifications
- Maintenance
- VeriFone Service and Support
- Troubleshooting Guidelines
TERMINAL SETUP
Antenna (Some Wireless Models)
28 OMNI 5XXX INSTALLATION GUIDE
V
E
RI
F
O
NE
C
O
NF
I
D
E
N
T
I
A
L
R
A
FT
3 Swipe the card through the magnetic card reader.
Figure 21 Using the Magnetic Card Reader
Antenna (Some
Wireless
Models)
For some Omni 5xxx terminals to establish a wireless connection, an external
antenna is provided. This connection allows communication with your service
provider to upload transaction data from the terminal and download system
upgrades to the terminal. Radio service is activated by your service provider.
This section only discusses Omni 5xxx terminals with external antenna.
Installation
The Omni 5xxx should arrive from manufacture with the antenna attached. If
unattached, use the following procedure to install the antenna:
1 Locate the antenna port on the back side of the Omni 5xxx terminal.
2 Align the connector on the end of the antenna with the connector on the end of
the terminal.
NOTE
Some Omni 5xxx terminals have an internal antenna and this section can be
ignored.
Only use the antenna designed for your unit. Failure to use the proper antenna
results in the inability to establish a wireless connection.
CAUTION
Never hold the unit by the antenna; doing so may break the connection and void
your warranty.