User's Manual

TERMINAL SETUP
Install Paper Roll
V
E
RI
F
O
NE
C
O
N
F
I
D
E
N
T
I
A
L
R
A
FT
OMNI 5XXX INSTALLATION GUIDE 17
3 Loosen the glued leading edge of the paper or remove the protective strip
from the new roll of paper, unwind the paper roll past any glue residue.
Figure 6 Removing Partial Paper Roll
4 Hold the roll so the paper feeds from the bottom of the roll (see Figure 7).
5 Drop the paper roll into the printer tray.
Figure 7 Loading Paper Roll
6 Pull paper up past glue residue from printer tray.
7 Close the paper roll cover by gently pressing directly on the cover until it clicks
shut, allowing a small amount of paper past the glue residue to extend outside
the printer door. (see Figure 8).
CAUTION
To prevent the paper roll cover from damaging the print roller, always gently press
down on the printer dust cover to close it.