User's Manual

QX100
22 Installation Manual
Figure A-2 Positioning the Reader
Startup of the QX100
The QX100 starts up automatically when:
• The reader is plugged into a terminal with a power source,
and the terminal is first powered-up.
• The reader is first plugged into an electrical outlet.
To recognize the QX100 is powered-up:
1. The reader’s lights being activated, blinking from left to
right, sequentially.
2. The lights are then followed by a short audio indication.
3. The LEDs go to their “ready for the next transaction” state.
LED Indicator Status
There are two common color schemes for the LED indicators.
Note
The LED indicator colors are credit card application
dependent. For information on what cards are
accepted and which application is being used, contact
your local VeriFone service provider.
DRAFT