User's Manual

SETUP
Installing or Replacing SAM Cards
QX700 I
NSTALLATION GUIDE 13
R
E
V
I
S
I
O
N
A
.
1
0
6 Close the SAM cardholder.
7 Slide the locking tab to the LOCK position.
Figure 4 Installing SAM Card
8 Replace the back casing and tighten the screws, after inserting or replacing
the necessary cards.
Figure 5 Replacing QX700 Back Casing
9 Reconnect the data cable to the device.
NOTE
Before inserting the SAM card, position it as shown in Figure 4, with the card’s
gold contacts facing outward, toward the unit. The cardholder slot in the reader
has a set of contacts.
EDC
B
A
NOTE
Tighten the screws using a Phillips head screw and with a recommended
tightening torque of 4.0 kgfcm.