Specifications

B Output Port (8-pin DIN connector)
pin 1 Signal Gnd
pin 2 DCD
pin 3 RTS
pin 4 CTS
pin 5 RxD (from external device)
pin 6 TxD (to external device)
pin 7 TxD Idle Level
This input sets the state of the TxD output
in the the idle state. When open, the idle
state of TxD is a mark (-V). When
grounded, the idle state of TxD is a
space (+V).
pin 8 Aux TxD
This output is a TTL version of the RS-232
TxD output, pin 6.
A Output Port (8-pin DIN connector)
1 Signal Gnd
2 DCD
3RTS
4 CTS
5 RxD (from external device)
6 TxD (to external device)
7 DTR
8 +8.5 VDC (used to power PIN pad devices)
TRANZport 232 Kit Part No. Description
P044-01-002 TRANZport 232
P044-01-001 TRANZport 232, USA Power Pack
01536-01 Power Pack, USA
20074-03 Power Pass-Thru Cable
00446-04 Serial Interface Cable
(2 included)
Service Unless otherwise instructed in this reference manual, do not, under any
circumstances, attempt any service, adjustments or repairs on this unit.
Before returning a unit to VeriFone, call the VeriFone toll free number,
800-834-9133, and ask the service/repair department for an MRA
(Merchandise Return Authorization) number. You must have an MRA
number prior to returning your requirement for repair.
Appendix F. TRANZport 232
TRANZ 460 Terminal F - 5