Specifications

PINpad
Display Device Response
12. <option prompt #1> Enter appropriate data, up to 8
alphanumeric characters, then press
[ENTER].
13. <option prompt #2> Enter appropriate data, up to eight
alphanumeric characters, then press
[ENTER].
14. PROCESSING
or
<communication prompts>
The terminal is communicating with
the host via VPL lines. If these lines
fail, dialup lines are used and the ter-
minal displays the standard communi-
cation prompts.
PROCESSING
15. <host message>
THANK YOU
The terminal displays the host re-
sponse. Record the approval number.
If the transaction is disapproved, you
should take necessary action. Press
[CLEAR] to return to the idle prompt.
If the transaction is approved and the
printer is enabled, the printer prints a
receipt of the transaction.
16. READY **nnn** The terminal returns to the idle prompt
indicating it is ready for the next
transaction.
Auth Only
This transaction is used to authorize a transaction without ticket data capture.
Display Response
1. READY **nnn**
AUTH ONLY
Press the [3] key labeled AUTH ONLY. The
terminal displays the type of transaction.
2. ENTER PASSWORD
******
Enter the manager password if required,
then press [ENTER]. The display echoes
each keypress with an asterisk.
3. ENTER ACCOUNT # Enter the account number via the keypad or
slide the card through the cardreader. If en-
try is made via the cardreader, go to Step 5.
4. EXPIRY DATE MMYY Enter the card’s expiration date, using two
digits each for month and year, then press
[ENTER].
6. Standard Key Operations
TRANZ 460 Terminal 6 - 7