Installation Guide

UX300 MANUAL CARD READER INSTALLATION GUIDE 31

CHAPTER 3

Specifications

This chapter discusses power requirements, dimensions, and other specifications

of the card reader.

Unit Power

Requirements

• MDB, LAN, PSTN, and ISDN units:

• Operation voltage: 9V DC to 43V DC, 4.4A

• Fully optically isolated serial current loop: 9600 bps

• Standard unit:

• Operation voltage: 9V DC to 12V DC, 1.6A

• Petrol unit:

• Operation voltage: 24V DC, 3.7A

• External Power Supply:

• 12V DC, 3.3A

• 24V DC, 3.75A

• Power Supply:

• 12V DC 3.3A

• 24V DC 3.75A

Temperature

• Indoor operating temperature: -20°C – 70°C (-4°F – 158°F)

• Indoor storage temperature: -25°C – 70°C (-13°F – 158°F)

• Outdoor operating temperature: -20°C – 60°C (-4°F – 140°F)

• Outdoor storage temperature: -25°C – 60°C (-13°F – 140°F)

• Relative humidity: 5% to 90% RH non-condensing

External

Dimensions

• Height: 72 mm (2.83 in)

• Width: 96 mm (3.78 in)

NOTE

If this device is to be used in the Nordic countries, or in any environment where

the temperature range exceeds the product’s operating temperature, it is the

responsibility of the integrators to ensure that the ambient environment is

controlled in such a way to ensure that the product operates within the specified

temperature range.