Installation Guide

SPECIFICATIONS
32 UX300 MANUAL CARD READER INSTALLATION GUIDE
• Depth 150 mm (5.9 in)
Weight • Unit weight:750 g (26.46 oz)
Memory • 128 MB DDRAM
• 256 MB NAND-Flash
Magnetic Stripe
Card
• Bi-directional reader
• Triple-track
Smart Card Reader • Non-sliding
• Card conserving plated landing contacts
SAM Requirements • 2 SAM slots
Peripheral Ports • Consistent ports:
• Power
• Powered USB Type A for UX PIN pads (host)
• USB Type B (client)
• COM1 (powered)
• ETH (LAN) connection with 2 colored LEDs for link state and speed
indication
• Analog RF CTLS antenna connector to the UX400 CTLS unit
• 8-PIN–RJ-45 connector to UX400 CTLS antenna unit
Model dependent cable connection board:
• 4 Powered USB Type A
• MDB
• Additional 1 or 2 COM powered ports
• ISDN
• PSTN
• RS-485
• An additional ETH connection with 2 colored LEDs for link state and speed
indication
• Printer COM
• PSTN_RJ9
• 485_3pin
Communication • COM: Up to 115200 HW RTS/CTS handshake
• MDB: 9600 bps fix, 9E1