Installation Guide

UX300 MANUAL CARD READER INSTALLATION GUIDE 11
CHAPTER 2
Setup
This chapter describes the setup procedure for the card reader and controller in
the following sections:
• Selecting Unit Location
• Unpacking the Shipping Carton
• Examining the Unit’s Features
• Installing or Replacing SAM Cards
• Cable Connections
• Power Supply
• Mounting the Device
• Grounding the Reader
• Service Switches
• Using the Device
Selecting Unit
Location
Use the following guidelines when selecting a location for your device.
• Select a location convenient for the customer. For optimum performance of
the card entry slot, place the unit at a 30° angle.
• Select a location near the device that will be connected to the reader/control
unit.
Environmental
Factors
The front panel of the device is dustproof and designed for any rainfall to run off of
it, as well as fade-proof from sun exposure, according to IP44 ratings.
WARNING
For safety, do not string cables or cords across a walkway.