Installation Guide
Table Of Contents
- UX300 Manual Card Reader
- Preface
- Device Overview
- Setup
- Specifications
- Maintenance and Cleaning
- Service and Support
- Troubleshooting Guidelines
SETUP
Installing or Replacing SAM Cards
16 UX300 MANUAL CARD READER INSTALLATION GUIDE
5 Carefully slide the SAM card into the slot, by aligning the card and carefully
sliding into the slot until fully inserted.
6 Close the SAM cardholder.
7 Slide the locking tab to the LOCK position.
Figure 5 Installing SAM Card
8 Slide the cardholder cover back, locking it into place.
Figure 6 Replacing the SAM Cardholders
9 Reconnect the cables to the device.
10 Power up reader for use.
NOTE
Before inserting the SAM card, position it as shown in Figure 5, with the card’s
gold contacts facing outward, toward the unit. The cardholder slot in the reader
has a set of contacts.
EDC
B
A