User's Manual
Table Of Contents
- V200 Non-Touch Installation Guide
- Contents
- Preface
- Device Overview
- Setup
- Selecting Unit Location
- Unpacking the Shipping Carton
- Examining the Unit’s Features
- Establishing Communication
- Loading a Paper Roll in the Printer
- Installing or Replacing MSAM Cards
- Connecting Optional Devices
- Connecting the Terminal Power Pack
- Privacy Shield
- Using the CTLS Reader
- Using the Smart Card Reader
- Using the Magnetic Card Reader
- Periodic Inspection
- Specifications
- Maintenance and Cleaning
- Service and Support
- Troubleshooting Guidelines
- Port Pinouts
- Caution and Warning Messages
- Contact Verifone
SETUP
Unpacking the Shipping Carton
16 V200 NON-TOUCH INSTALLATION GUIDE
The following table shows the combinations of methods that must be used when
installing the MX 900 Series terminal to protect the cardholder's PIN during PIN
entry.
Additionally, you may wish to implement the following to further increase security
during PIN entry.
• Offer PIN security literature at the point of sale
• Use signage to limit the view of the PED to just that of the cardholder
Privacy Shield
In order to comply with PCI, perform visual inspection of the terminal every 24
hours to ensure that the privacy shield is installed.
Unpacking the
Shipping Carton
Open the shipping carton and carefully inspect its contents for possible tampering
or shipping damage. The V200 Non-Touch is a secure product and any tampering
may cause the device to cease to function properly.
To unpack the
shipping carton
1 Validate the authenticity of the sender by verifying the shipping tracking
number and other information located on the product order paperwork.
2 Remove and inspect the following items:
• Terminal
• Power pack
• Telephone line cord
• Paper roll
Refer to Accessories and Documentation for more information about the
device’s related accessories.
3 Remove all plastic wrapping from the terminal and other components.
Table 3 PIN Entry Protection Measures
Method
Observation Corridors
Cashier Customer Queue
Customers
Elsewhere
On-Site
Cameras
Countertop with
Swivel Stand
No Action Needed. Customer positions PED. No Action
Needed.
Do not install within
view of cameras.
Countertop without
stand
Position unit to face
away from the cashier.
Use signage to block
cashiers view.
Position unit between
customer and the next in
cue. Install the optional
privacy shield.
Privacy Shield
Installed.
Do not install within
view of cameras.
NOTE
The stand swivels to allow the cardholder to position the PED to optimize their
viewing angle. If the stand will be used, you must include prompts in your
application directing the cardholder to position the PED strategically to restrict the
view of others.