User's Manual

SETUP
Examining the Unit’s Features
18 V200 NON-TOUCH INSTALLATION GUIDE
• Two selection keys on the left and right side of the navigation button.
• A magnetic card reader, built into the right side. The icon shows the proper
swipe direction, with the stripe down and facing inward, toward the keypad.
• A smart card reader, built into the front of the terminal. The icon indicates
proper card position and insertion direction.
• The internal thermal printer opens toward the rear of the unit.
Connection Ports
Turn the unit upside down and remove the rear cover to view the connection ports.
Notice that the ports are recessed. Different ports provide connections to a
communications line, optional peripheral devices, and the power supply.
Figure 4 shows how to open the rear cover of the V200 Non-Touch device.
Figure 4 Opening the Rear Cover
Figure 5 shows the power and connection ports for the V200 Non-Touch.
Figure 5 Power and Connection Ports
1
2
3
A
B
WARNING
Do not connect the terminal to the power supply until all the peripherals are
attached.