User's Manual

Table Of Contents
SETUP
Connecting the Terminal Power Pack
V200 N
ON-TOUCH INSTALLATION GUIDE 25
Contact your Verifone representative or visit the online store at
www.store.verifone.com for information on these devices.
The following illustration shows how to make a peripheral connection to the USB
port
Figure 14 Sample ECR Connection
Connecting the
Terminal Power
Pack
When you have finished connecting optional peripheral(s), you are ready to
connect the V200 Non-Touch to the provided power source.
To connect the
terminal power pack
1 Remove the terminal rear cover to access the power port.
CAUTION
ECRs require a separate power source. Before connecting to an ECR or similar
device, remove the power cord from the V200 Non-Touch unit.
)MAGE0LACEHOLDER/NLY
#ORRECT)LLUSTRATIONS#OMING3OON
CAUTION
Using an incorrectly rated power supply may damage the terminal or cause it not
to work as specified. Before troubleshooting, ensure that the power supply being
used to power the terminal matches the requirements specified on the bottom of
the terminal. (See Chapter 3, Technical Specifications, for detailed power supply
specifications.) Obtain the appropriately rated power supply before continuing
with troubleshooting.
NOTE
Plugging in the power pack to a power source automatically turns on the
terminal.