User's Manual

Table Of Contents
TROUBLESHOOTING GUIDELINES
Printer Does Not Print
V200 N
ON-TOUCH INSTALLATION GUIDE 41
If possible, process a transaction manually, using an external keypad, instead
of the card reader. If the manual transaction works, the problem may be a
defective reader.
If the manual transaction does not process, proceed to Check the Telephone
Line.
If the problem persists, contact your local Verifone representative.
Check the Smart Card Reader
Perform a test transaction using several different smart cards to ensure the
problem is not a defective card.
Ensure that the card is inserted correctly and that the card is not removed
prematurely.
Ensure the SAM cards are properly inserted in the cardholders and that the
cardholders are properly secured (see Installing or Replacing MSAM Cards).
If the manual transaction does not process, proceed to Check the Telephone
Line.
If the problem persists, contact your local Verifone representative.
Check the Telephone Line
Disconnect the telephone line from the terminal and connect it to a working
telephone to check for a dial tone. If there is no dial tone, replace the
telephone cable.
If the problem appears to be with the telephone line, check with the party you
are trying to call to see if their system is operational. If they are not
experiencing difficulties with their line, contact the telephone company and
have your line checked.
If the telephone line works, contact your local Verifone representative for
assistance.
Printer Does Not
Print
If the printer does not work properly:
Check terminal power connection.
Check if the printer is out of paper and that the roll is properly installed. Open
the paper roll cover and install a new roll of printer paper or ensure that the roll
is feeding from the bottom.
Verify that the printer roller and paper roll dust cover are properly installed.
If the problem persists, contact your Verifone distributor or service provider.
NOTE
The V200 Non-Touch reads the card upon card removal or withdrawal from the
slot.