User's Manual
Table Of Contents
- V200 Non-Touch Installation Guide
- Contents
- Preface
- Device Overview
- Setup
- Selecting Unit Location
- Unpacking the Shipping Carton
- Examining the Unit’s Features
- Establishing Communication
- Loading a Paper Roll in the Printer
- Installing or Replacing MSAM Cards
- Connecting Optional Devices
- Connecting the Terminal Power Pack
- Privacy Shield
- Using the CTLS Reader
- Using the Smart Card Reader
- Using the Magnetic Card Reader
- Periodic Inspection
- Specifications
- Maintenance and Cleaning
- Service and Support
- Troubleshooting Guidelines
- Port Pinouts
- Caution and Warning Messages
- Contact Verifone
V200 NON-TOUCH INSTALLATION GUIDE 43
CHAPTER 7
Port Pinouts
This section contains port pinout tables for the V200 Non-Touch.
RS-232 Port (COM1)
Ethernet Port
(LAN)
Connector PIN Function Description
1 Portpwr (9 to12
V DC)
Port power (11.6V typ.,
365mA)
2 NC No connection
3 NC No connection
4 GND Power ground
5 RXD Receive data
6 TXD Transmit data
7 NC No connection
8 NC No connection
18
NOTE
The 10-pin download cable (VPN 26264) connects to the 8-Pin RS-232 port of
the device, wherein Pin 2 from the cable corresponds to Pin 1 on the RS-232
port.
Connector PIN Function Description
1 TXD+ Transmit data +
2 TXD- Transmit data -
3 RXD+ Receive data +
4 NC No connection
5 NC No connection
6 RXD- Receive data -
7 NC No connection
8 NC No connection
18