User's Manual
Table Of Contents
- V200 Non-Touch Installation Guide
- Contents
- Preface
- Device Overview
- Setup
- Selecting Unit Location
- Unpacking the Shipping Carton
- Examining the Unit’s Features
- Establishing Communication
- Loading a Paper Roll in the Printer
- Installing or Replacing MSAM Cards
- Connecting Optional Devices
- Connecting the Terminal Power Pack
- Privacy Shield
- Using the CTLS Reader
- Using the Smart Card Reader
- Using the Magnetic Card Reader
- Periodic Inspection
- Specifications
- Maintenance and Cleaning
- Service and Support
- Troubleshooting Guidelines
- Port Pinouts
- Caution and Warning Messages
- Contact Verifone
V200 NON-TOUCH INSTALLATION GUIDE 13
CHAPTER 2
Setup
This chapter describes the setup procedures for the V200 Non-Touch terminal,
under the following sections:
• Selecting Unit Location
• Unpacking the Shipping Carton
• Examining the Unit’s Features
• Establishing Communication
• Loading a Paper Roll in the Printer
• Installing or Replacing MSAM Cards
• Connecting Optional Devices
• Connecting the Terminal Power Pack
• Privacy Shield
• Using the CTLS Reader
• Using the Smart Card Reader
• Using the Magnetic Card Reader
Selecting Unit
Location
Use the following guidelines when selecting a location for your device.
Ease of Use
• Select a location convenient for both merchant and cardholder.
• Select a flat support surface, such as a countertop or table.
• Select a location near a power outlet and a telephone/modem line connection.
• For safety, do not string the power cord in a walkway or place it across a
walkway on the floor.
Environmental
Factors
• Do not use the terminal where there is high heat, dust, humidity, moisture, or
caustic chemicals or oils.
• Keep the terminal away from direct sunlight and anything that radiates heat,
such as a stove or motor.