User's Manual

SETUP
MSAM, Micro SD and SIM Cards
V400
M PLUS 3G & V400M BASES INSTALLATION GUIDE 17
V
E
R
I F
O N
E
C
O
N
F I
D
EN
T
I
A
L
3 Remove the old card, if any and install the MSAM card by carefully sliding it
into the slot (with the gold contacts facing outward) until fully inserted.
Figure 6 Inserting MSAM Card
4 Turn the cardholder back in place and slide the cover to lock the cardholder.
5 If you are finished replacing or inserting cards, replace the battery and
terminal rear cover. Lock the cover by sliding the tab to the left.
Changing or
Installing a Micro
SD Card
To change or install a Micro SD card:
1 Follow steps 1 to 3 of Accessing Card Compartments to get to the Micro SD
cardholder.
Figure 7 Inserting Micro SD Card
2 Unlock the cardholder and turn upwards to allow the insertion or removal of
cards.
3 Remove the old card, if any and insert the Micro SD card carefully into the
cardholder (with the gold contacts facing outward) and turn the cardholder
back in place.
4 Slide the cover to lock the cardholder closed.
1
2
1
2