User's Manual

SETUP
Installing MSAM, SIM, and Micro SD Cards
18 V400M TERMINAL & BASES INSTALLATION GUIDE
V
E
R
I
F
O
N
E
C
O
N
F
I
D
EN
T
I
A
L
3 Remove the battery and place in a secure location.
Figure 5 Accessing Cardholders
4 The MSAM, SD and SIM cardholders are now accessible.
Changing or
Installing an MSAM
Card
To change or install an MSAM card:
1 Follow steps 1 to 3 of Accessing Card Compartments to get to the MSAM
cardholder.
Figure 6 Inserting MSAM Card
2 Push in the old MSAM card, if any, to release it from the slot.
3 Carefully insert the new MSAM card carefully into the slot facedown (with the
gold contacts facing downward).
C
1
2
NOTE
Aside from using the pull tab to remove the battery from the compartment, you can
also use the recessed areas on the lower portion of the battery to leverage the
battery out.
1
2
1
2
NOTE
The V400m Terminal & Bases supports two MSAM cards in a side-by-side
configuration.