User's Manual

SETUP
Installing MSAM, SIM, and Micro SD Cards
V400
M TERMINAL & BASES INSTALLATION GUIDE 19
V
E
R
I
F
O
N
E
C
O
N
F
I
D
EN
T
I
A
L
4 If you are finished replacing or inserting cards, replace the battery and
terminal rear cover. Lock the cover by sliding the tab to the left.
Changing or
Installing a SIM
Card
To change or install SIM cards:
1 Use steps 1 to 3 of Accessing Card Compartments to get to the SIM
cardholder.
2 Unlock the cardholder and swing upwards to allow the insertion or removal of
cards.
3 Remove the old card, if any, and install the SIM card by carefully sliding it into
the slot (with the gold contacts facing outward) until fully inserted.
Figure 7 Inserting SIM Card
4 Turn the cardholder back in place and slide the cover to lock the cardholder.
5 If you are finished replacing or inserting cards, replace the battery and
terminal rear cover. Lock the cover by sliding the tab to the left.
NOTE
The V400m supports two SIM cards in a side-by-side configuration.
1
2