User's Manual

SETUP
Installing MSAM, SIM, and Micro SD Cards
20 V400M TERMINAL & BASES INSTALLATION GUIDE
V
E
R
I
F
O
N
E
C
O
N
F
I
D
EN
T
I
A
L
Changing or
Installing a Micro
SD Card
To change or install a Micro SD card:
1 Follow steps 1 to 3 of Accessing Card Compartments to get to the Micro SD
cardholder.
Figure 8 Inserting Micro SD Card
2 Unlock the cardholder and turn upwards to allow the insertion or removal of
cards.
3 Remove the old card, if any and insert the Micro SD card carefully into the
cardholder (with the gold contacts facing outward) and turn the cardholder
back in place.
4 Slide the cover to lock the cardholder closed.
5 If you are finished replacing or inserting cards, replace the battery and
terminal rear cover. Lock the cover by sliding the tab to the left.
1
2