User's Manual

SETUP
Loading Printer Paper
V400
M TERMINAL & BASES INSTALLATION GUIDE 21
V
E
R
I
F
O
N
E
C
O
N
F
I
D
EN
T
I
A
L
Loading Printer
Paper
Use the following steps to load a roll of 57mm x 40mm thermal printer paper into
the compartment.
1 Unlock the paper compartment by pulling up the latch and swinging the door
downwards.
Figure 9 Opening Printer Paper Door
2 Load the paper roll as shown in Figure 10, with the edge of the paper on the
top of the roll.
Figure 10 Procedure for Loading Paper Roll
3 Pull a length of paper up over the serrated cutter and close the compartment
door.
C
CAUTION
Before processing transactions in battery mode, make sure you have more than
10% battery life. Do not risk losing transaction data or printing capabilities,
connect the terminal to the power pack if battery level is below 10%.