User's Manual

SETUP
Cable Connections
V400
M TERMINAL & BASES INSTALLATION GUIDE 23
V
E
R
I
F
O
N
E
C
O
N
F
I
D
EN
T
I
A
L
Cable
Connections
The V400m Full-Function Base can utilize several types of cable connections.
Cable Connections
Using the FF Base
To connect the terminal to other devices via Ethernet, RS-232, and USB, use the
V400m FF Base. The FF Base provides a standard RJ-45 LAN socket, RS-232
port, a mini-USB port. The V400m terminal must be docked on the base to utilize
cable connectivity
Figure 12 FF Base, Front and Rear View
The FF Base features the following port configuration:
Smart Card
Reader
The smart card transaction procedure can vary depending on the application.
Verify the proper procedure with your application provider before performing a
smart card transaction.
Figure 13 Using the Smart Card Reader
Cable Configuration
Ethernet port RJ-45 socket (for connecting PIN Pad to LAN infrastructure)
RS232 port RS232 socket (for connecting PIN Pad to LAN infrastructure)
USB ports Micro USB and type A USB