User's Manual

SETUP
PIN Protection Measures
14 V400M PLUS 3G & V400M BASES INSTALLATION GUIDE
V
E
R
I F
O N
E
C
O
N
F I
D
EN
T
I
A
L
• Do not use the V400m Plus 3G & V400m Bases outdoors.
Electrical
Considerations
• Avoid using this product during electrical storms.
• Do not use the V400m Plus 3G & V400m Bases unit near water or in moist
conditions.
• Disconnect the device from its POS terminal before cleaning.
Contactless
Considerations
Avoid having metallic objects in proximity of the contactless antenna. If you need
to mount the terminal to vertical or inclined surfaces, use a flat, non-metallic
mounting plate.
PIN Protection
Measures
Use the following techniques to provide effective screening of PIN-entry devices
(PEDs) during the PIN entry process. You can use these methods in combination,
although in some cases a single method might suffice.
• Position the terminal on the check-in stand in such a way as to block visual
observation of the PIN-entry process. Examples include:
• Visual shields designed into the check-in stand. The shields may be solely
for shielding purposes, or may be part of the general check stand design.
• Position the PED so that it is angled in such a way that PIN spying is
difficult.
• Install the PED on an adjustable stand that allows consumers to swivel the
terminal sideways and/or tilt it forwards/backwards to a position that makes
visual observation of the PIN-entry process difficult.
• Position in-store security cameras so that the PIN-entry keypad is not visible.
CAUTION
The V400m Plus 3G & V400m Bases is not waterproof or dustproof and is
intended for indoor use only. Any damage to the unit from exposure to rain or dust
can void any warranty.
WARNING
Due to risk of electrical shock or terminal damage, do not use the terminal near
water, including a bathtub, wash bowl, kitchen sink or laundry tub, in a wet
basement, or near a swimming pool. Also, avoid using this product during
electrical storms. Avoid locations near electrical appliances or other devices that
cause excessive voltage fluctuations or emit electrical noise (for example, air
conditioners, neon signs, high frequency or magnetic security devices, or electric
motors).
CAUTION
Using an enclosed metal frame or mount may negatively affect contactless
performance