User's Manual

Table Of Contents
SETUP
Unpacking Shipping Carton
V400
M PLUS 3G & V400M BASES INSTALLATION GUIDE 15
V
E
R
I F
O N
E
C
O
N
F I
D
EN
T
I
A
L
The following table describes the two preferred mounting methods and the
recommended measures to protect from PIN capture in four observation corridors:
Verifone also recommends instruction of the cardholder regarding safe PIN-entry.
This can be done with a combination of:
Signage on the PED
Prompts on the display, possibly with a click-through screen
Literature at the point of sale
A logo for safe PIN-entry process.
Ensuring User
Privacy
To protect users’ privacy when they enter their personal identification number
(PIN), the area of visibility should be no larger than a cone taken from the number
5 key at an angle of 45° and covering an area of 270° directly in front of the user.
Unpacking
Shipping Carton
Carefully inspect the shipping carton and its contents for possible tampering or
damage.
1 Remove the V400m Plus 3G & V400m Bases unit from the shipping carton.
The standard package contains the PIN pad, power pack, battery, and printer
paper roll. Refer Accessories and Documentation to for more information
about V400m Plus 3G & V400m Bases related accessories.
2 Remove any protective plastic wrap and place the unit on a table or
countertop.
3 Remove the clear protective film from the display.
Table 3 Mounting Methods and Protection Measures
Method Cashier
Customer in
Queue
Customers
Elsewhere
On-site
Cameras
Countertop
without stand
Use signage
behind the
PED
Install so that
customer is
between PED and
next in queue
No action
needed
Do not install
within view of
cameras
Countertop
with stand
No action
needed
Install so that
customer is
between PED and
next in queue
No action
needed
Do not install
within view of
cameras
CAUTION
This device is a secure product and any tampering can cause it to cease to
function or operate in an unsecured manner.