Installation guide

TERMINAL SETUP
VX 520 Setup
24 VX 520 INSTALLATION GUIDE
7 Close the paper roll cover by gently pressing directly on the cover until it clicks
shut, allowing a small amount of paper past the glue residue to extend outside
the printer door. (see Figure 10).
Figure 10 Closing Paper Roll Cover
8 Tear the paper off against the serrated metal strip in the printer.
Installing/Replacing
MSAM Cards
When you first receive your VX 520 terminal, you may need to install one or more
MSAM cards or you may need to replace old cards.
CAUTION
To prevent the paper roll cover from damaging the print roller, always gently
press down on the printer dust cover to close it.
NOTE
For paper ordering information, refer to Accessories and Documentation.
CAUTION
Observe standard precautions when handling electrostatically sensitive devices.
Electrostatic discharges can damage this equipment. VeriFone recommends
using a grounded anti-static wrist strap.