Installation guide

TERMINAL SETUP
VX 520 Setup
26 VX 520 INSTALLATION GUIDE
5 Install an MSAM card by carefully sliding it into the slot until it is fully inserted.
Figure 13 Installing an MSAM Card
6 Close the MSAM cardholder panel, and then replace the terminal rear cover.
Connecting
Optional Devices
The VX 520 terminal supports some peripheral devices designed for use with
electronic point-of-sale terminals.
Different terminals support different devices, so for more information about
optional devices, please contact your VeriFone distributor.
23
%4(
NOTE
Before inserting the MSAM card, position it as shown in Figure 13, with the card’s
gold contacts facing down. The cardholder connector base has an image
resembling the notched corner of an MSAM card to ensure the card is positioned
correctly.
CAUTION
Before connecting any peripheral device, remove the power cord from the
terminal and ensure that the green indicator LED is not lit. Reconnect the power
cord only after you are finished connecting the peripheral device(s). For complete
information about peripheral installation and use, refer to the user documentation
supplied with those devices.