Installation guide

TERMINAL SETUP
VX 520 Sprocket Setup
38 VX 520 INSTALLATION GUIDE
Establishing
Telephone and Line
Connections
Connect a telephone cord (RJ-11) from the Line port on the terminal, then route it
directly to a telephone wall jack. Connect a telephone unit to the Phone port (see
Figure 23).
Figure 23 VX 520 Sprocket Telephone and Line Connections
Installing Paper Tray
The VX 520 Sprocket terminal uses 76 mm carbonized paper sheets. This type of
paper requires an external-mounted paper tray. Use the following procedure to
install the paper tray for the VX 520 Sprocket terminal:
To install the paper
tray
1 Align the slots with the paper tray clasps.
2 Slide the paper tray into the rear of the terminal.
WARNING
To reduce the risk of fire, use only No. 26AWG or larger UL Listed or CSA
Certified Telecommunication Line Cord.