Specifications

TERMINAL SETUP
Installing/Replacing SIM Card (VX 520 GPRS Only)
VX 520 R
EFERENCE GUIDE 27
Installing/
Replacing SIM
Card (VX 520
GPRS Only)
The VX 520 GPRS terminal supports the installation of a SIM (Subscriber Identity
Module) card. Use the following procedure to replace or install a SIM card.
1 Place the terminal upside down on a soft, clean surface to protect the display
from scratches.
2 Remove the battery.
Figure 15 Removing the Smart Battery
3 After removing the battery, you will see the SIM compartment.
4 Insert the SIM into the cardholder.
Figure 16 Inserting SIM Card
5 Install the battery.
Connecting
Optional
Devices
The VX 520 terminal supports some peripheral devices designed for use with
electronic point-of-sale terminals.
Different terminals support different devices. For more information about optional
devices, please contact your VeriFone distributor.
3)- 3)-
3)-
A B C
23
CAUTION
Before connecting any peripheral device, remove the power cord from the
terminal and ensure that the green indicator LED is not lit. Reconnect the power
cord only after you are finished connecting the peripheral device(s). For complete
information about peripheral installation and use, refer to the user documentation
supplied with those devices.