Specifications

VERIX TERMINAL MANAGER
Verix Terminal Manager Menus
VX 520 R
EFERENCE GUIDE 47
Enter and Exit Verix
Terminal Manager
To enter terminal manager after you have turned on the VX 520 terminal, follow
the procedure described in Table 7.
NOTE
On successful completion, some operations automatically exit terminal manager
and restart the terminal. Other operations require that you exit terminal manager
and restart the terminal. To manually exit terminal manager, select
1> RESTART in
VERIX TERMINAL MGR.
Table 7 Enter Verix Terminal Manager
Display Action
VERIFONE VX 520
QT52E20K
02/26/2010 Verix
COPYRIGHT 1997-2010
VERIFONE
ALL RIGHTS RESERVED
At startup, the terminal displays a copyright notice
screen that shows the terminal model number, the OS
version of the VX 520 stored in the terminal’s flash
memory, the date the firmware was loaded into the
terminal, and the copyright notice.
This screen appears for three seconds, during which
time you can enter Verix Terminal Manager by
simultaneously pressing F2 and F4.
You can extend the display period of this screen by
pressing any key during the initial three seconds. Each
keypress extends the display period an additional three
seconds.
VERIFONE VX 520
QT52E20K
02/26/2010 Verix
COPYRIGHT 1997-2010
VERIFONE
ALL RIGHTS RESERVED
If some other certificate is loaded by a reseller (e.g.,
bank), the fourth line is left blank.
VERIFONE VX 520
QT52E20K
02/26/2010 Verix
* * T A M P E R * *
COPYRIGHT 1997-2010
VERIFONE
ALL RIGHTS RESERVED
If an attempt to break into the terminal’s system has
been made, the message
**TAMPER** is
displayed in place of the certificate. The terminal will
remain in this state until the condition has been
remedied.
<application prompt>
If an application already resides on the terminal, an
application-specific prompt is displayed. Otherwise, an
error message is displayed. For more information on
startup errors, see STARTUP ERRORS.