User manual

March 2013 Verix SEPT410 & XEPT410 User Manual 9
CONFIDENTIAL – Chase Paymentech Solutions, LLC - CONFIDENTIAL
Turning the Vx610 On and Off
Off – Hold down [Cancel] for approximately 5 seconds.
The Vx610 can only be turned off when it is running on battery. When plugged in to a power source, it
can not be turned off.
On - Hold down [Enter] for approximately 5 seconds.
Wait approximately 1 minute for communications to re-establish.
Vx610 Wireless Icons
Wireless icons located on the SoftPay idle screen alert the user of the terminal status. The icons do not
appear until a transaction has been attempted with the exception of the battery status and power on
icons.
Communication Methods
The Comm Server application is being utilized by the terminal for communication
Landline or dial-up is being used.
Antenna Connection
Displays when the wireless modem is connected to the network.
Displays when the wireless modem is not connected to the network.
Signal Strength
Displays when the signal strength is between 1 and 25%.
Displays when the signal strength is between 26 and 50%.
Note: At least 35% is recommended to prevent processing comm errors.
Displays when the signal strength is between 51 and 75%.
Displays when the signal strength is between 76 and 100%.
Power On
Displays to indicate that the Vx610 is plugged in.
Battery Status
Empty battery
Batter at 25% capacity.
Batter at 50% capacity.
Batter at 75% capacity.
Batter at 100% capacity.
Low battery – less than 10%