User manual

10 Verix SEPT410 & XEPT410 User Manual Installation
CONFIDENTIAL – Chase Paymentech Solutions, LLC – CONFIDENTIAL
Battery Conditioning
Perform battery conditioning to maximize battery life. The process will take several hours and the device
must be connected to power.
Display
Action
Sale F2
Settlement F3
Void F4
Press [F2] and [F4] simultaneously.
SYSTEM MODE ENTRY
PASSWORD
- - - - - - - - - - -
Key the password and press [ENTER].
SYS MODE MENU 1
EDIT PARAMETERS F2
DOWNLOAD F3
RESTART F4
Press [].
SYS MODE MENU 2
MEMORY FUNCTIONS F2
TERMINAL INFO F3
CLOCK F4
Press [F3] to select Terminal info.
SYS MODE MENU
SYSTEM INFO F2
DIAGS AND LOGS F3
BATTERY STATUS F4
Press [F4] for Battery Status.
FULL CHARGE 1701
REMAINING 9% 156
VOLTAGE 7700
SN 0000000000001
INITIALIZED YES
BATT CONDITIONER F4
Press [F4] for Battery Conditioner.
STEP 1/3 1ST CHARGE
Battery fully charges. No action required.
STEP 2/3 DISCHARGE
Battery fully discharges. No action required.
STEP 3/3 CHARGE
Battery fully charges. No action required.
Connecting the Antenna
1. Connect the antenna to the outlet on the back of the
VX610 terminal.
2. Turn the antenna clockwise until tight. Do not over
tighten the antenna.
Attaching/Detaching the Battery Pack
To attach the battery pack:
1. Place the battery pack into the available
slot on the back of the terminal.
2. Snap into place.
To detach the battery pack:
1 Push in on the grooved side of the battery
pack
2 Lift up battery until removed.