User manual

March 2013 Verix SEPT410 & XEPT410 User Manual 1
CONFIDENTIAL – Chase Paymentech Solutions, LLC - CONFIDENTIAL
Installation
General Information
Where to Put the Terminal
Select a location for the terminal near a power outlet and a telephone jack that is convenient for the
operator and offers adequate ventilation and protection. Certain conditions may damage the terminal or
cause it to operate poorly. In general, avoid areas with:
 Excessive heat or dust
 Oil or moisture
 Electrical noise caused by air conditioners, motors, fans, neon signs, or power tools
 Direct sunlight
 Artificial light that could reflect glare off the display panel
Unpacking
Carefully inspect the shipping carton and its contents for shipping damage. If the terminal is damaged, file
a claim immediately with the shipping company and notify Chase Paymentech. Do not use a damaged
terminal.
Remove all the items from the carton. It should contain:
 A terminal
 A telephone line cord
 A power pack with a 6-foot cord
 Paper roll
Remove any protective plastic wrapping or protective plastic strips from the terminal.
Save the carton and packing material for repackaging or moving the terminal in the future.
Connecting the Telephone Line
To connect terminals to a telephone line:
1. Connect one end of the standard telephone line cord to the high-speed dial
modem port on the terminal.
2. Connect the other end of the telephone line cord to the telephone wall jack
(Telco RJ11).